-- *****************************************************************
-- CISCO-RPMS-MIB.my: Cisco Resource Policy Management System (RPMS)
-- Server MIB file.
--
-- March 26, 2002 Patrick Hamel (path@cisco.com)
-- August 17, 2001 Wei Song (weisong@cisco.com)
--
-- Copyright (c) 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
-- Caution. This MIB is temporary and experimental. In the future it
-- will be removed from products, perhaps with short notice, in favor
-- of more standard or generic MIBs. Application developers should not
-- depend on long-term access to this MIB.
--
-- Please report usage of the MIB to Cisco Systems to support future
-- decision regarding particular MIB objectsCISCO-RPMS-MIB DEFINITIONS::=BEGIN
IMPORTSCounter32,Gauge32,Unsigned32,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
RowStatus,TimeStampFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
ciscoExperiment
FROM CISCO-SMI;ciscoRpmsMIB MODULE-IDENTITYLAST-UPDATED"200204170000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-rpms@cisco.com"DESCRIPTION"This MIB contains objects pertinent to a Resource
Policy Management System (RPMS) server.
RPMS is a key component of Cisco Any Service Any Port
(ASAP) solution and provides the ability to
dynamically share resources across network access
servers (NAS). RPMS enables enforcement of Service
Level Agreements(SLA) between wholesale providers and
their customers. Such SLA enforcement is done at call
pre-authentication stage. An SLA is conceptually a set
of clauses (limits) that dictate how voice, dial
and/or virtual private data network (VPDN) services
will be provided by the wholesaler.
"REVISION"200204170000Z"DESCRIPTION"Updated name from Resource Pool Manager Server to
Resource Policy Management System (RPMS). This
reflects product change,
Corrected omission of 'crpmsVpdnGroupCpEntryStatus'
from 'crpmsVpdnGroup' object group in initial
release,
Updated E-Mail contact to correct list for rpms."
REVISION"200111010000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoExperiment 84}ciscoRpmsMIBObjects OBJECTIDENTIFIER::={ ciscoRpmsMIB 1}crpmsSystem OBJECTIDENTIFIER::={ ciscoRpmsMIBObjects 1}crpmsCustomerProfile OBJECTIDENTIFIER::={ ciscoRpmsMIBObjects 2}crpmsVpdn OBJECTIDENTIFIER::={ ciscoRpmsMIBObjects 3}crpmsNotif OBJECTIDENTIFIER::={ ciscoRpmsMIBObjects 4}-- --
-- RPMS system object group
-- --crpmsSubsystemTable OBJECT-TYPESYNTAXSEQUENCEOF CrpmsSubsystemEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains currently working RPMS
subsystems. Each row contains the name of the
subsystem and its uptime since last initialization."::={ crpmsSystem 1}crpmsSubsystemEntry OBJECT-TYPESYNTAX CrpmsSubsystemEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A subsystem entry contains information of a RPMS
subsystem. At the system startup, if a subsystem fails
to initialize itself, it will not appear in this table.
If a subsystem becomes unavailable, its corresponding
row will be removed from this table."INDEX{ crpmsSubsystemIndex }::={ crpmsSubsystemTable 1}
CrpmsSubsystemEntry ::=SEQUENCE{
crpmsSubsystemIndex Unsigned32,
crpmsSubsystemName SnmpAdminString,
crpmsSubsystemUptime TimeStamp}crpmsSubsystemIndex OBJECT-TYPESYNTAXUnsigned32(1..128)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An unique value, greater than zero, for each subsystem.
It is recommended that values are assigned contiguously
starting from 1."::={ crpmsSubsystemEntry 1}crpmsSubsystemName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..31))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of the subsystem entry."::={ crpmsSubsystemEntry 2}crpmsSubsystemUptime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time (in hundredths of a second) since the
subsystem was last (re)initialized."::={ crpmsSubsystemEntry 3}-- --
-- RPMS customer profile object group
-- --crpmsCpTable OBJECT-TYPESYNTAXSEQUENCEOF CrpmsCpEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The customer profile table contains information about
all SLAs hosted on an SLA Server."::={ crpmsCustomerProfile 1}crpmsCpEntry OBJECT-TYPESYNTAX CrpmsCpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A customer profile (Cp) entry contains information about
a specific customer. A customer profile is a set of limits
associated with a customer. These limits control how
RPMS will respond to an incoming call under various
scenarios."INDEX{IMPLIED crpmsCpName }::={ crpmsCpTable 1}
CrpmsCpEntry ::=SEQUENCE{
crpmsCpName SnmpAdminString,
crpmsCpLimit Unsigned32,
crpmsCpOverflowLimit Unsigned32,
crpmsCpActiveCalls Gauge32,
crpmsCpActiveOverflowCalls Gauge32,
crpmsCpAttemptedCalls Counter32,
crpmsCpAttemptedOverflowCalls Counter32,
crpmsCpRejections Counter32,
crpmsCpOverflowRejections Counter32,
crpmsCpLimitThreshold Unsigned32,
crpmsCpOverflowLimitThreshold Unsigned32,
crpmsCpCallRejectionThreshold Unsigned32,
crpmsCpOverflowRejectThreshold Unsigned32,
crpmsCpEntryStatus RowStatus}crpmsCpName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..31))MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The name of the customer profile. This name uniquely
identifies the customer profile in the RPMS system."::={ crpmsCpEntry 1}crpmsCpLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The maximum number of concurrent calls allowed
in this customer profile. Once this limit is exceeded,
RPMS will reject any new calls unless an overflow limit
(crpmsCpOverflowLimit) is configured for this customer."DEFVAL{0}::={ crpmsCpEntry 2}crpmsCpOverflowLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-create
STATUScurrentDESCRIPTION"The maximum number of calls allowed after the customer
profile limit(crpmsCpLimit) has been reached. Such calls
are termed overflow calls."DEFVAL{0}::={ crpmsCpEntry 3}crpmsCpActiveCalls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of current active calls for this customer
profile."::={ crpmsCpEntry 4}crpmsCpActiveOverflowCalls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of current active overflow calls for this
customer profile."::={ crpmsCpEntry 5}crpmsCpAttemptedCalls OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of attempted calls (both successful and
failed) for this customer profile."::={ crpmsCpEntry 6}crpmsCpAttemptedOverflowCalls OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of attempted overflow calls (both successful
and failed) for this customer profile."::={ crpmsCpEntry 7}crpmsCpRejections OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of rejected calls for this customer
profile (crpmsCpOverflowRejections plus rejections
due to unavailable resources)."::={ crpmsCpEntry 8}crpmsCpOverflowRejections OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of rejected overflow calls for this customer
profile."::={ crpmsCpEntry 9}crpmsCpLimitThreshold OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"percent"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A threshold defined for the customer profile limit
(crpmsCpLimit). It represents the percentage of the limit
which, when crossed triggers a crpmsRisingAlarm or a
crpmsFallingAlarm notification (refer to the notification
definitions in this MIB for more details).
A value of 100 percent cannot be exceeded and therefore
disables this threshold setting. A value of 0 percent is
always exceeded.
"DEFVAL{100}::={ crpmsCpEntry 10}crpmsCpOverflowLimitThreshold OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"percent"MAX-ACCESSread-createSTATUScurrentDESCRIPTION
"A threshold defined for the customer profile overflow
limit (crpmsCpOverflowLimit). It represents the percentage
of the limit that when exceeded triggers a crpmsRisingAlarm
or a crpmsFallingAlarm notification (refer to the
notification definitions in this MIB for more details).
A value of 100 percent cannot be exceeded and therefore
disables this threshold setting. A value of 0 percent is
always exceeded.
"DEFVAL{100}::={ crpmsCpEntry 11}crpmsCpCallRejectionThreshold OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"percent"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A threshold defined for the number of customer profile
rejected calls (crpmsCpRejections) as a percentage of the
number of attempted calls (crpmsCpAttemptedCalls) which,
when crossed, triggers a crpmsRisingAlarm or
crpmsFallingAlarm notification (refer to the notification
definitions in this MIB for more details).
A value of 100 percent cannot be exceeded and therefore
disables this threshold setting. A value of 0 percent is
always exceeded.
"DEFVAL{100}::={ crpmsCpEntry 12}crpmsCpOverflowRejectThreshold OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"percent"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A threshold defined for the number of customer profile
rejected overflow calls (crpmsCpOverflowRejections) as a
percentage of the number of attempted overflow calls
(crpmsCpAttemptedOverflowCalls) which, when crossed,
triggers a crpmsRisingAlarm or a crpmsFallingAlarm
notification (refer to the notification definitions in this
MIB for more details).
A value of 100 percent cannot be exceeded and therefore
disables this threshold setting. A value of 0 percent is
always exceeded.
"DEFVAL{100}::={ crpmsCpEntry 13}crpmsCpEntryStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Used to create, delete or modify this row. None of the
columnar objects can be modified except this one, when
the row is active."::={ crpmsCpEntry 14}-- --
-- RPMS VPDN object group
-- --crpmsVpdnGroupTable OBJECT-TYPESYNTAXSEQUENCEOF CrpmsVpdnGroupEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"A VPDN group manages a number of sessions. A VPDN
session may use a MLP link, which is contained within
a particular MLP bundle. A VPDN group has a limit of
maximal sessions, the number of bundles that this
VPDN group can allocate, and the number of links for
each bundle.
The VPDN group table contains information about VPDN
group of a RPMS server, each group a row. If a row is
added or removed, its corresponding row in the
crpmsVpdnGroupCpTable has to be added or removed as
well."::={ crpmsVpdn 1}crpmsVpdnGroupEntry OBJECT-TYPESYNTAX CrpmsVpdnGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A VPDN group entry contains information about
a specific VPDN group. VPDN groups contain the
necessary setting to establish a VPDN session
(tunneling protocol, home gateway information, and
other data) as well as limits on various parameters
(maximum concurrent sessions, MLP bundles, etc.)."INDEX{IMPLIED crpmsVpdnGroupName }::={ crpmsVpdnGroupTable 1}
CrpmsVpdnGroupEntry ::=SEQUENCE{
crpmsVpdnGroupName SnmpAdminString,
crpmsVpdnTunnelId SnmpAdminString,
crpmsVpdnTunnelProtocol INTEGER,
crpmsVpdnLimit Unsigned32,
crpmsVpdnOverflowLimit Unsigned32,
crpmsVpdnMlpBundleLimit Unsigned32,
crpmsVpdnLinksPerBundleLimit Unsigned32,
crpmsVpdnBundles Gauge32,
crpmsVpdnActiveCalls Gauge32,
crpmsVpdnActiveOverflowCalls Gauge32,
crpmsVpdnRejections Counter32,
crpmsVpdnSizeRejections Counter32,
crpmsVpdnLimitThreshold Unsigned32,
crpmsVpdnEntryStatus RowStatus}crpmsVpdnGroupName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..31))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The name of the VPDN group. This name uniquely
identifies a VPDN group in the RPMS system."::={ crpmsVpdnGroupEntry 1}crpmsVpdnTunnelId OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The tunnel Id of the VPDN group.
For Cisco IOS 12.05T and later, the tunnel id matches
the remote name configured on the HGW router. The
following is an example:
vpdn-group 1
accept dialin l2tp virtual-template 1 remote isp1
local name hg
For old Cisco IOS releases, the tunnel id matches the
incoming statement:
vpdn incoming isp1 hgw virtual-template 1
In above examples, the object has the value isp1.
"::={ crpmsVpdnGroupEntry 2}crpmsVpdnTunnelProtocol OBJECT-TYPESYNTAXINTEGER{l2f (1),l2tp (2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The protocol used by the tunnel of the VPDN group.
There are only 2 possible value:
l2f - Layer 2 Forwarding Protocol
l2tp - Layer 2 Tunneling Protocol
"DEFVAL{ l2f }::={ crpmsVpdnGroupEntry 3}crpmsVpdnLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Limit of the resource pool for this VPDN group."DEFVAL{0}::={ crpmsVpdnGroupEntry 4}crpmsVpdnOverflowLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Limit of the overflow pool for this VPDN group."DEFVAL{0}
::={ crpmsVpdnGroupEntry 5}crpmsVpdnMlpBundleLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Limit of MLP (multilink protocol) bundles for this
VPDN group."DEFVAL{0}::={ crpmsVpdnGroupEntry 6}crpmsVpdnLinksPerBundleLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Limit of links per bundle for this VPDN group."DEFVAL{0}::={ crpmsVpdnGroupEntry 7}
crpmsVpdnBundles OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of active MLP bundles in the tunnel
of the VPDN group."::={ crpmsVpdnGroupEntry 8}crpmsVpdnActiveCalls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of active calls that belong to this VPDN
group."::={ crpmsVpdnGroupEntry 9}crpmsVpdnActiveOverflowCalls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The number of active overflow calls that belong to
this VPDN group."::={ crpmsVpdnGroupEntry 10}crpmsVpdnRejections OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of calls rejected because one of the group
limits (crpmsVpdnOverflowLimit, crpmsVpdnMlpBundleLimit
and crpmsVpdnLinksPerBundleLimit) was exceeded."::={ crpmsVpdnGroupEntry 11}crpmsVpdnSizeRejections OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of rejected calls of the VPDN group, because
the max allowed size limit (crpmsVpdnOverflowLimit +
crpmsVpdnLimit) was exceeded."::={ crpmsVpdnGroupEntry 12}crpmsVpdnLimitThreshold OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"percent"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A threshold defined for the vpdn group limit
(crpmsVpdnLimit) which, when crossed, triggers a
crpmsRisingAlarm or a crpmsFallingAlarm notification
(refer to the notification definitions in this MIB
for more details).
A value of 100 percent cannot be exceeded and therefore
disables this threshold setting. A value of 0 percent is
always exceeded.
"DEFVAL{100}::={ crpmsVpdnGroupEntry 13}crpmsVpdnEntryStatus OBJECT-TYPE
SYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Used to create, delete or modify this row. None of the
columnar objects can be modified except this one, when
the row is active."::={ crpmsVpdnGroupEntry 14}crpmsVpdnGroupCpTable OBJECT-TYPESYNTAXSEQUENCEOF CrpmsVpdnGroupCpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A VPDN group can be associated with a number of customer
profiles, this table represents this relationship. It's
double indexed by index of crpmsVpdnGroupTable and index
of crpmsCpTable. If rows are added to or removed from
one of two tables, Its corresponding row(s) in this
table will be added or removed as well."::={ crpmsVpdn 2}
crpmsVpdnGroupCpEntry OBJECT-TYPESYNTAX CrpmsVpdnGroupCpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A VPDN group customer profile entry contains information
of SLA associated with this VPDN group."INDEX{ crpmsVpdnGroupCpVpdnGroupName,IMPLIED crpmsVpdnGroupCpCpName }::={ crpmsVpdnGroupCpTable 1}
CrpmsVpdnGroupCpEntry ::=SEQUENCE{
crpmsVpdnGroupCpVpdnGroupName SnmpAdminString,
crpmsVpdnGroupCpCpName SnmpAdminString,
crpmsVpdnGroupCpEntryStatus RowStatus}crpmsVpdnGroupCpVpdnGroupName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..31))
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The name of VPDN groups in the table."::={ crpmsVpdnGroupCpEntry 1}crpmsVpdnGroupCpCpName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..31))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The name of customer profile in the table."::={ crpmsVpdnGroupCpEntry 2}crpmsVpdnGroupCpEntryStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-create
STATUScurrentDESCRIPTION"Used to create, delete or modify this row. None of the
columnar objects can be modified except this one, when
the row is active."::={ crpmsVpdnGroupCpEntry 3}-- --
-- RPMS Notification object group
-- --crpmsAlarmObject OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The object identifier of the destination object
related to the notification. For example, if
crpmsCpLimitThreshold is crossed, this variable
should have the OID of crpmsCpLimit."::={ crpmsNotif 1}crpmsAlarmValue OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSaccessible-for-notify
STATUScurrentDESCRIPTION"The current value that caused the threshold alarm
to be sent."::={ crpmsNotif 2}crpmsAlarmThresholdObject OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The object identifier of the Threshold that is related
to the notification. For example, if
crpmsCpLimitThreshold is crossed, this variable should
have the OID of crpmsCpLimitThreshold."::={ crpmsNotif 3}-- --
-- RPMS Notification group
-- --ciscoRpmsMIBNotificationPrefix OBJECTIDENTIFIER::={ ciscoRpmsMIB 2}ciscoRpmsMIBNotifications OBJECTIDENTIFIER::=
{ ciscoRpmsMIBNotificationPrefix 0}crpmsRisingAlarm NOTIFICATION-TYPEOBJECTS{
crpmsAlarmObject,
crpmsAlarmValue,
crpmsAlarmThresholdObject
}STATUScurrentDESCRIPTION"This trap is generated to notify the manager(s) that
one of the thresholds is crossed in rising direction
(exceeded).
The same trap will not be generated until the sample
value falls below the threshold low water mark and rises
to cross it again.
NOTE: A threshold low water mark is by default 90% of the
actual threshold percentage (threshold * 90%) integer
rounded.
"::={ ciscoRpmsMIBNotifications 1}crpmsFallingAlarm NOTIFICATION-TYPEOBJECTS{
crpmsAlarmObject,
crpmsAlarmValue,
crpmsAlarmThresholdObject
}STATUScurrentDESCRIPTION"This trap is generated to notify the manager(s) that one
of the thresholds is crossed in the falling direction
(reaches the threshold low water mark after being exceeded).
The same trap will not be generated until the sample
value rises above the threshold and reaches the low water
mark again.
NOTE: A threshold low water mark is by default 90% of the
actual threshold percentage (threshold * 90%) integer
rounded.
"::={ ciscoRpmsMIBNotifications 2}-- --
-- Conformance
-- --ciscoRpmsMIBConformance OBJECTIDENTIFIER::={ ciscoRpmsMIB 3}ciscoRpmsMIBCompliances OBJECTIDENTIFIER::={ ciscoRpmsMIBConformance 1}ciscoRpmsMIBGroups OBJECTIDENTIFIER::=
{ ciscoRpmsMIBConformance 2}-- --
-- Compliance
-- --ciscoRpmsMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
the Cisco-RPMS-MIB"MODULE-- this moduleMANDATORY-GROUPS{
crpmsSystemGroup,
crpmsCpGroup,
crpmsVpdnGroup,
crpmsNotifGroup,
crpmsThresholdNotifGroup
}OBJECT crpmsSubsystemName
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsSubsystemUptime
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."
OBJECT crpmsCpActiveCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsCpActiveOverflowCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsCpAttemptedCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsCpAttemptedOverflowCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsCpRejections
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsCpOverflowRejections
MIN-ACCESSread-onlyDESCRIPTION
"Write access is not required."OBJECT crpmsVpdnTunnelId
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsVpdnBundles
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsVpdnActiveCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsVpdnActiveOverflowCalls
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsVpdnRejections
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT crpmsVpdnSizeRejections
MIN-ACCESSread-only
DESCRIPTION"Write access is not required."::={ ciscoRpmsMIBCompliances 1}-- --
-- units of conformance
-- --crpmsSystemGroup OBJECT-GROUPOBJECTS{
crpmsSubsystemName,
crpmsSubsystemUptime
}STATUScurrentDESCRIPTION"This group contains a table providing the general
system level information."::={ ciscoRpmsMIBGroups 1}crpmsCpGroup OBJECT-GROUPOBJECTS{
crpmsCpLimit,
crpmsCpOverflowLimit,
crpmsCpActiveCalls,
crpmsCpActiveOverflowCalls,
crpmsCpAttemptedCalls,
crpmsCpAttemptedOverflowCalls,
crpmsCpRejections,
crpmsCpOverflowRejections,
crpmsCpLimitThreshold,
crpmsCpOverflowLimitThreshold,
crpmsCpCallRejectionThreshold,
crpmsCpOverflowRejectThreshold,
crpmsCpEntryStatus
}STATUScurrentDESCRIPTION"This group contains a table providing the information
of customer profile."::={ ciscoRpmsMIBGroups 2}crpmsVpdnGroup OBJECT-GROUPOBJECTS{
crpmsVpdnTunnelId,
crpmsVpdnTunnelProtocol,
crpmsVpdnLimit,
crpmsVpdnOverflowLimit,
crpmsVpdnMlpBundleLimit,
crpmsVpdnLinksPerBundleLimit,
crpmsVpdnBundles,
crpmsVpdnActiveCalls,
crpmsVpdnActiveOverflowCalls,
crpmsVpdnRejections,
crpmsVpdnSizeRejections,
crpmsVpdnLimitThreshold,
crpmsVpdnEntryStatus,
crpmsVpdnGroupCpEntryStatus
}STATUScurrentDESCRIPTION"This group contains tables providing the information
of VPDN."::={ ciscoRpmsMIBGroups 3}crpmsNotifGroup OBJECT-GROUPOBJECTS{
crpmsAlarmObject,
crpmsAlarmValue,
crpmsAlarmThresholdObject
}STATUScurrentDESCRIPTION"This group contains helper objects specifying
notifications."::={ ciscoRpmsMIBGroups 4}crpmsThresholdNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{
crpmsRisingAlarm,
crpmsFallingAlarm
}STATUScurrent
DESCRIPTION"This group contains threshold crossing related alarms and
notifications."::={ ciscoRpmsMIBGroups 5}END